Search

Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module

Products > Modules > Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module
    • 1
    • 2
    • 3
    • 4
    • 5

Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module

shared：
Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module
Product model
AS07-M11015
Chip solution
CC1101
Maximum power
10mW
Air speed
1.2K~500K
Packaging form
SMD/plug-in 1 * 8x1.27 SIP
Emission current
29mA
Communication interface
SPI
Central frequency band
433M
Power supply voltage
1.8-3.6V
Antenna form
spring/IPEX/external
Size
12 * 20.8mm
Reference distance
1000 meters
Module features: small size, excellent performance
SPI wireless module is a pure hardware wireless module, and its interface adopts SPI communication mode, which requires an external MCU to program and configure the register parameters of the module chip to complete data communication


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

HW-658 GSM/GPRS Mould USB GPS Module For Raspberry Pi

Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module

1 on-board MAX485 chip , is a tool for RS-485 communications , low-power , Slew-Rate Transceiver 2 onboard then 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication 3 the chip has drawn all of the pins can be controlled by the microcontroller operation 4 Working voltage : 5V 5 board size : 44 (mm) x14 (mm)

DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter

ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .

MP3 decoder board, lossless car speaker audio amplifier board modified diy audio receiver module 4.1

Feature Power Supply： 3.7-5V SNR：90dB THD+N：-70dB Crosstalk：-86dB DNR：91dB Support Profile：A2DP/AVCTP/AVDTP/AVRCP/HFP LOS：>15m

BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module

☆Ultra-low standby power consumption 90uA~400uA ☆ Ultra-long connection distance 100 feet/60 meters ☆Super fast response speed 0.4 seconds ☆ Android, Apple, PC, MAC are all universal. ☆No byte limit for sending and receiving, up to 3K Bytes/sec ☆ No need to do MFI ☆ IOS system is perfectly supported. ☆Android 4.3 system is perfectly supported.

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w

Features: 4 USB expansion ports, compatible with USB2.0 / 1.1 transmission USB to UART for Raspberry Pi for serial debugging Multiple indicators for easy access to power, USB to UART and USB expansion interface Operating voltage: 5V Product Size: 65mm × 30mm Fixed hole diameter: 3.0mm Not include Raspberry Pi

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

CSR8645 4.0 audio module, support APTx lossless compression speaker amplifier

The main control chip CSR8645 stereo audio module can make calls. The headset can be connected to 2 mobile phones at the same time. CSR has better sound quality. BLE 4.0, good wall penetration effect, APT-x high sound quality transmission.

74HC595 driver 8-digit digital tube display module

1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube; 2. wide working voltage 3.3V to 5V; 3. PCB size: 71mm * 22mm 4. digital tube model: 0.364 bits

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

100% brand new and high quality! This section of induction heating using low-voltage DC power supply 12-48V. Maximum current 20A, maximum power 1000W. Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc. Can directly heat iron, carbon steel, graphite, titanium alloy and other materials. Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver
Previous： Outdoor advertising screen full color led screen board module p10 rgb led module
Next： Nano V3.0 nano development board ATMEGA328P CH340 improved version
Return
TOP
86-755-83877216
smartbes
smartbes