Item Specification:

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC1.5GHz

1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, 5.0, BLE
Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
2 × micro-DMI ports (up to 4kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.0 graphics
Micro-SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A*)
5V DC via GPIO header (minimum 3A*)
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Operating temperature: 0 – 50 degrees C ambient

Banana PI M1 is the open source hardware platform which published to assistant the
Elastos.org open source OS, Banana PI M1 is the dual core Android 4.2 product which more
better than the Raspberry Pi.

Banana Pi M1 series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and
cubieboard imange.
Elastos coordinate multi CUP to from the family cloud entirnment which based on the
“software/hardware service”

This display features with 9 inch LCD and 1024x 600 high resolution.
Its driver board, DMI/VGA/2AV+Reversing driver board, supports automatically switch to AV2.

Smart Electronics~ Orange pi orangepi one plus development board H6 orange pie

Orange pi zero Computer development board

1.This 9 layers case is designed for the latest Raspberry Pi 4 Model B boards 2. Made of acrylic material, which won't block Pi's Wifi or ble signal. Keep your Raspberry Pi 4 Model B motherboard safer and nicer. Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally. 3. If you have any question with this case,please feel free to get support and services via Buyer Message or Q&A.

Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

Pasking list
1. ABS case x 1 set (including one bottom case, three face covers)
2. Sticking pads x 1 set
2. Sticking pads x 1 set

[Package selection]

1, the board

2, single board + heat sink

3, the basic package: single board + heat sink + power head + USB line

4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera

[Screen selection]

1, no screen

2, 4.3 inch capacitive screen [Model: S430]

3, 7 inch capacitive screen [Model: X710]

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016. Compared to the Raspberry Pi 2 it has:

A 1.2GHz 64-bit quad-core ARMv8 CPU
802.11n Wireless LAN
BLE 4.1 & BLE Low Energy

Features:
4 USB expansion ports, compatible with USB2.0 / 1.1 transmission

USB to UART for Raspberry Pi for serial debugging

Multiple indicators for easy access to power, USB to UART and USB expansion interface

Operating voltage: 5V

Product Size: 65mm × 30mm

Fixed hole diameter: 3.0mm

Not include Raspberry Pi