Search

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

Products > Amplifier Board > DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module
    • 1
    • 2
    • 3

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

product description:
Power amplifier chip: TPA3118
Amplifier power: 1*60W
Supply voltage: 8~24VDC
Speaker impedance: 4-8Ω
Size: 46*35*1.6mm (length, width and thickness)
Total height of the board: 12mm
shared：


product description:
Power amplifier chip: TPA3118
Amplifier power: 1*60W
Supply voltage: 8~24VDC
Speaker impedance: 4-8Ω
Size: 46*35*1.6mm (length, width and thickness)
Total height of the board: 12mm

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers

Smart Electronics Touch Button Module Capacitor Switch Sensor TTP223

Raindrop sensor module/rain sensor/large area raindrop module

* Distribution bit to adjust sensitivity * A fixed bolt hole for easy installation * Power indicator, the output signal LED indicator * The comparator output, the signal is clean, waveform, driving ability over 15mA * Wide voltage LM393 comparator * A large area of rain board, more conducive to detect rain * Board with positioning holes to facilitate installation * Raindrops and control panels are separate, easy to wire leads

HW-658 GSM/GPRS Mould USB GPS Module For Raspberry Pi

Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

HD SPI 0.96 inch 1.3 inch 1.44 inch 1.8" tft spi st7735 80 x 160 color display OLED LCD screen st7735

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

PAM8403 Wireless Stereo Audio Receiver Module For Digital Amplifier Sound Loud Board Micro USB BlUETOOTH 4.0 3W+3W

1. Working voltage: DC 5V 2. Output power: 3W+3W 3. Speaker type: 3W*2 4-8ohm 4. Mounting Hole: 3.0mm Features: Mini design, sound loud and clear, strong sense of hierarchy, ultra-small size, simple installation, wide application range, low prices, quality and stability

43A current limiting control semiconductor refrigeration driven high-power intelligent vehicle motor drive module BTS7960

LNA 50-4000 MHz RF SPF5189 NF 0.6dB Low Noise Amplifier Signal Receiver Board Wireless Communication Module With Shield Shell

Specifications: LNA: 50-4000mhz NF: SPF5189Z LNA0: 0.6 dB Amplifier: FM Size: 34 x 25mm/1.33 x1.0inch

STM32F103C8T6 ARM STM32 Minimum System Development Board Module

CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm
Previous： For ATTINY85 Ardu, Digispark Kickstarter Micro USB Development Board
Next： 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486
Return
TOP
86-755-83877216
smartbes
smartbes