Search

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Products > Amplifier Board > 100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V
Rated output power :100W(4 Ohm ± 35V)
Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended
PCB size :30 x 50 x 35mm
Pitch : 5.08mm
Hole distance between two power tube : 47mm
shared：


Operating voltageDual DC 10 - 45V recommended Dual DC 35V
Rated output power100W(4 Ohm  ± 35V)
Maximum output power150W (4 Ohm    ±  45V) enormous heat, is not recommended
PCB size30 x 50 x 35mm
Pitch5.08mm
Hole distance between two power tube47mm



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module

☆Ultra-low standby power consumption 90uA~400uA ☆ Ultra-long connection distance 100 feet/60 meters ☆Super fast response speed 0.4 seconds ☆ Android, Apple, PC, MAC are all universal. ☆No byte limit for sending and receiving, up to 3K Bytes/sec ☆ No need to do MFI ☆ IOS system is perfectly supported. ☆Android 4.3 system is perfectly supported.

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank

1.Aplly Battery Type:18650 battery(not include) 2.Output Voltage: 5V 2.1A 3.Input Voltage: 5V1A 4.Instructions: Level 4 Capacity indicator 5.Lighting: with LED lights 6.Size: 140 * 64 * 22mm 7.Rated Voltage : 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module

Automatic induction: When someone enters its induction range, enter the high level, people leave the sensor range is automatically delayed off high. Output low. 2. photosensitive control (optional): the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.

MT3608 2A Max DC-DC Step Up Power Module Booster Power Module

FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module

1 on-board MAX485 chip , is a tool for RS-485 communications , low-power , Slew-Rate Transceiver 2 onboard then 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication 3 the chip has drawn all of the pins can be controlled by the microcontroller operation 4 Working voltage : 5V 5 board size : 44 (mm) x14 (mm)

TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

Nano V3.0 CH340 improved version Atmega328P USB to TTL with USB cable

Technical parameters : 1.12 digital input / output port D2 to D13 2.8 analog inputs A0 ~ A7 3.1 pairs TTL level serial transceiver port RX / TX 4.6 PWM port , D3 , D5, D6, D9 , D10 , D11 5. Atmel ATmega328P - AU MCU 6 USB download and power 7. Support the external 5V ... 12V DC power supply 8. To support 9V battery powered 9. support ISP download

HW-658 GSM/GPRS Mould USB GPS Module For Raspberry Pi

Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed
Previous： XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver
Next： Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger
Return
TOP
86-755-83877216
smartbes
smartbes