Search

3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

Products > LED/LCD Module > 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486
    • 1
    • 2
    • 3

3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

100% brand new and high quality
Features:
Vivid TFT Display in 65K Color.
Touch Panel Selected.
SPI Interface, 4 IOs only.
With SD Card Extended (Except 1.44").
Module Display Screen only, other accessories demo in the picture is not included.
shared：


100% brand new and high quality
Features:
Vivid TFT Display in 65K Color.
Touch Panel Selected.
SPI Interface, 4 IOs only.
With SD Card Extended (Except 1.44").
Module Display Screen only, other accessories demo in the picture is not included.
 
Specification:
Size: 5.5 x 9.8cm(2.17 x  3.86in)
 
Electrical Parameters:
Screen Size: 3.5inch
Type: TFT
Driver IC: ILI9488
Resolution: 480 x 320(Pixel)
Module Port: 4-Wire SPI Interface
Effective Display Area(AA): 48.96 X 73.44mm
Mudule PCB Baseboard Size: 56.34 x 98mm
VCC Voltage: 3.3V-5V
Logic IO Voltage: 3.3V(TTL)
Power: 90mA
 
Note:
1. No retail package.
2. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Thank you!



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

DC 30W adjustable booster module LM2587 outperforms the lm2577 in power 5A

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

The input voltage: 5V2A output : 5V1A The input voltage: 5V4A 9V1.67A(qc3.0) Output : 5V2A 9V1A Charging current: 1000mAh Charging power: up to 10W Wireless conversion efficiency: 73%, boost circuit 90%

HW-658 GSM/GPRS Mould USB GPS Module For Raspberry Pi

Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

Original UNO R3 development board original single-chip C language programming learning motherboard kit

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction (D2A4) Size:15mmX11MM Supply:2.5v-5.5v

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield

Specifications : Size: 3.9cm x 5.1cm Materials: PCB board and electronic components Package included : 1 x 5V 2-Channel Relay Module Shield

43A current limiting control semiconductor refrigeration driven high-power intelligent vehicle motor drive module BTS7960

MP3 decoder board, lossless car speaker audio amplifier board modified diy audio receiver module 4.1

Feature Power Supply： 3.7-5V SNR：90dB THD+N：-70dB Crosstalk：-86dB DNR：91dB Support Profile：A2DP/AVCTP/AVDTP/AVRCP/HFP LOS：>15m

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Previous： DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module
Next： Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense
Return
TOP
86-755-83877216
smartbes
smartbes