Search

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

Products > Other Module > Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger
    • 1
    • 2
    • 3
    • 4
    • 5

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

The input voltage: 5V2A output : 5V1A

The input voltage: 5V4A 9V1.67A(qc3.0)

Output : 5V2A 9V1A

Charging current: 1000mAh

Charging power: up to 10W

Wireless conversion efficiency: 73%, boost circuit 90%
shared：


Function parameter description:

 
1, the input voltage: 5V2A   output : 5V1A
 
2,  the input voltage: 5V4A 9V1.67A(qc3.0)   output : 5V2A 9V1A
 
3, charging current: 1000mAh
 
4, charging power: up to 10W
 
5, wireless conversion efficiency: 73%, boost circuit 90%
 
6, transmission distance: maximum 10mm, recommended transceiver spacing 2mm~4mm
 
7, standby power consumption: the average power consumption is less than 50mW
 
8, over-temperature protection: When the temperature is higher than 60 degrees when charging,
automatically stop charging for 2 minutes, and then recharge after the temperature drops
 
9, over-current protection: when the charge and current consumption is greater than 1.8A,
automatically stop charging to prevent damage to the charger
 
10, the implementation of standards: Qi wireless charging standard
 
11, product certification: compatible QI certification standards
Provide QI protocol wireless charger PCBA sales, can be nested together to sell,
can help you print LOGO, can open private mode, and can provide you with one-stop
assembly and production services, to help you move toward wireless, intelligent direction!



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board

This module is 5-12V power supply, when the power supply is less than 9V, 2A DC is required. The other power supply port is 3.5-4.2V, suitable for lithium battery power supply. The computer can debug USB-TTL. Suitable for portable. Two sets of antenna SMA ports, GPS and GSM antennas are provided.

TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V

Product Name: high power digital 2.1 power amplifier board Chip type: tpa3116d2 * 2 Input voltage: dc10-25v (DC) Output power: 50wx2 + 100wxi Max Channel: dual channel + 0.1 subwoofer Output impedance: 4-8 Ω Frequency response 20Hz-20KHz Protection function: short circuit overheat power supply anti reverse connection Switching frequency: 1.2MHz Features: power on delay / anti shock Size: about 88 * 66 * 27.6m Net weight: about 105g

The promotional HC-SR04 ultrasonic module Ultrasonic ranging module

The main technical parameters: 1, using voltage: DC5V 2: static current: less than 2 ma 3, high level output: 5 v 4, level output: 0 v 5, induction Angle: no more than 15 degrees 6, detection range: 2 cm - 450 cm 7,high precision: up to 0.3 cm

For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield

Specifications : Size: 3.9cm x 5.1cm Materials: PCB board and electronic components Package included : 1 x 5V 2-Channel Relay Module Shield

DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module

Product parameters: Starting voltage: 1.2V Working voltage: 2V-6.5V Output voltage: 5V/9V/12V optional Working voltage is 2V-6.5V Input current: 2A Output power: ≤8W (no matter how high it is, it is easy to overheat) No-load current 2-3.5mA (input 1.5V output 12V) Board size: 33*16*6.5mm Output pad: USB/DC optional

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module

☆Ultra-low standby power consumption 90uA~400uA ☆ Ultra-long connection distance 100 feet/60 meters ☆Super fast response speed 0.4 seconds ☆ Android, Apple, PC, MAC are all universal. ☆No byte limit for sending and receiving, up to 3K Bytes/sec ☆ No need to do MFI ☆ IOS system is perfectly supported. ☆Android 4.3 system is perfectly supported.

HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w

Features: 4 USB expansion ports, compatible with USB2.0 / 1.1 transmission USB to UART for Raspberry Pi for serial debugging Multiple indicators for easy access to power, USB to UART and USB expansion interface Operating voltage: 5V Product Size: 65mm × 30mm Fixed hole diameter: 3.0mm Not include Raspberry Pi

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

LCD1602 yellow-green screen 1602A lcd display blue

69.5*21.8*17.8 weighs about 30 grams

TTGO T-Display ESP32 WiFi And Ble Module Development Board

Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).
Previous： 100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V
Next： 3D printer parts DIY motherboard kit mega2560 + LCD circuit control board
Return
TOP
86-755-83877216
smartbes
smartbes